$<p>Messicks has over 50,000 Kubota parts in our Mount Joy warehouse. Our computerized inventory system enables us to have stock items packaged and at your door in a moments notice, or we can order in specialized items that may be less commonly used. We have taken the time to categorize frequently used parts so you can easily find common maintenance items for your tractor. If you need help finding specific part numbers call us at <b>877-260-3528</b> or email <a href="\">parts@messicks.com</a>.</p>$

#K5371-97520 Blade Kit (3 Blades)

$65.77

65 In Stock

Weight: 10.56 lbs

This is the Optional H20 blade kit Order K5371-34340 if just a single optional blade is required.

Part number K5371-97521 may appear on Kubota packaging.

Installation Tips

(25 minutes)
Make sure the cup, spring washers are facing correct. Cup side faces up.

11/17/2023
WILLIAMSON, NY
james

Unrated (30 minutes)

9/27/2022
HIBBING, MN
Michael

(15 minutes)
Use an electric or pneumatic impact gun to remove the bolt holding the blades. Remove debris from the washers and hardware. Also, make sure to take off the protective cups on the bottom of the spindles and clean out all dirt, grass, and excess grease. Reinstall the pieces in the correct order paying close attention to the cupped washers. They should both be cupped toward the blade. Also, make sure spacer with hexagonal hole is properly seated, then hold the blade and hardware in place with one hand while finger tightening the bolt. Set a torque wrench to the proper amount (all of my machines use a max torque of 87ft.lbs.) if need be, use a pice of 2x4 or 4x4 blocking to hold blade in place while tightening.

9/9/2022
Knoxville, TN
Curtis

Unrated (30 minutes)
I use a cordless DEWALT 20V MAX XR 1/2" High Torque Impact Wrench with a 30 MM impact socket. Don't have to lock the blades just comes right off. Need to get the tractor up off the ground to facilitate the length of the impact wrench.

8/18/2022
Lacombe, LA
Robert