Heat the spindle housing in the oven at 225 degrees for 30 minutes and your bearings should drop right in without having to press or tap them in with a hammer\socket. Let cool for an hour or until the bearings don't spin at the outer race. Don't forget to install the small inner sleeve that goes between the upper and lower bearings.
Heat the spindle housing in the oven at 225 degrees for 30 minutes and your bearings should drop right in without having to press or tap them in with a hammer\socket. Let cool for an hour or until the bearings don't spin at the outer race. Don't forget to install the small inner sleeve that goes between the upper and lower bearings.
LA JOSE, PA
James