New Holland Hay Equipment 1410 Parts

CNH Direct Ship
Discbine Knives
Kit of 16CW/16CCW - Type 2
Part #86624752
$52.00
Cutting Knife Kit
Part #86624751
$33.00
CCW 14 DEGREE TWIST KNIVES
Part #86621873
$1.85
CW 14 DEGREE TWIST KNIVES
Part #86621872
$1.85
Discbine Parts and Maintenance
CW MODULE ASSEMBLY
Part #84220789
CW
$373.70
STONEGUARD
Part #87044117
$25.88
(#6) TOP CAP ASSEMBLY
Part #87753841
$257.55
Shock Pro Repair Kit
Part #87580643
$47.61
DISC
Part #87646406
$74.31
Short Shaft (248mm)
Part #86519042
$59.96
Long Shaft (268mm)
Part #86519039
$70.73
Top Cap w/Shock Pro
Part #87753842
$241.39
CCW REMAIN MODULE
Part #84220790R
$348.45
CW REMAIN MODULE
Part #84220789R
$348.45
New Holland
New Holland Hay Parts
Friction Repair Kit
Part #86601404
$125.61
Uncategorized Parts
SMV METAL
Part #2000884
$11.99
SLINGER
Part #86515894
$3.75
NUT G8 P -75
Part #86518194
$1.45
CCW Module Gear Box
Part #84220790
CCW
$373.70
SEAL
Part #86511201
$9.21
HEX FLNG SCRW
Part #86515926
$3.03
NUT
Part #87725066
$5.14
SKID/SHOE
Part #87047426
$39.85
BEARING, BALL
Part #86575514
$82.00
BOLT ASSEMBLY
Part #86571960
$44.25
SPECIAL NUT
Part #86557260
$8.88
TIE BOLT
Part #86501934
$15.90
BUSHING
Part #87659928
$32.86
SPACER
Part #86573045
$10.93
1409 OM
Part #87617352
$30.60
1409 PM
Part #87058240
$29.85
BEARING
Part #87029741
$55.09
BELT, TRANSMISSI
Part #86627809
$143.85
CROSS
Part #87047945
$198.97
CROSS
Part #84355317
$77.64
High Stub Shoe
Part #87622885
High Stub
$98.91
HOUSING, BEARING
Part #84527700
$179.78
SMV SPADE W/HDWR
Part #2001033
$2.49
STONEGUARD
Part #87047845
$26.24
Q: What oil do I use in the Disc Modules?

Messick's uses 80W90 GL4 or GL5.

answered by BLK on 11/19/2014
Q: How much oil is in the Disc Modules?

They hold approximately 10 OZ of oil.

answered by BLK on 11/19/2014
Q: How often should I change the oil in the modules?

 Every 300 hours or yearly, which ever comes first.

answered by BLK on 11/19/2014
Q: Can I put a Shock Pro Hub on the drive modules?

 No. Shock Pro can not be used on the drive modules.

answered by BLK on 11/19/2014
New Holland mow max bar explination
video showing the parts of the cutterbar and how they work and go together.
Roll Gap Setting
How to set the roll gap properly.
Machine Setup and Wide Thin Kit
Machine operation, and function of the wide thin kit.
Video on tearing down a cutterbar
video on tearing down a cutter bar.