New Holland Hay Equipment 1431 Parts

CNH Direct Ship
Qt. SAE 80W-90 Hypoide EP Gear Lube
Part #B80901
1Q 80W90
$5.45
1 Gal SAE 80W-90 Gear Lube
Part #B80902
1Gal 80W90
$21.40
Discbine Knives
CCW 7 DEGREE TWIST (Type 1)
Part #9847684
$1.85
CW 7 DEGREE TWIST
Part #9847683
$1.85
Cross and Bearing Kit
Part #86520896
$47.87
CCW 14 DEGREE TWIST KNIVES
Part #86621873
$1.85
CW 14 DEGREE TWIST KNIVES
Part #86621872
$1.85
Discbine Parts and Maintenance
CW MODULE ASSEMBLY
Part #84220789
CW
$373.70
STONEGUARD
Part #87044117
$25.88
(#6) TOP CAP ASSEMBLY
Part #87753841
$257.55
DISC
Part #87646406
$74.31
Short Shaft (248mm)
Part #86519042
$59.96
Long Shaft (268mm)
Part #86519039
$70.73
CCW REMAIN MODULE
Part #84220790R
$348.45
CW REMAIN MODULE
Part #84220789R
$348.45
Grease Guns
14oz High-Temp Grease
Part #9861804DS
$4.50
New Holland Hay Parts
Friction Repair Kit
Part #86601404
$125.61
Uncategorized Parts
SMV METAL
Part #2000884
$11.99
SLINGER
Part #86515894
$3.75
NUT G8 P -75
Part #86518194
$1.45
BUSHING
Part #365820
$35.51
CCW Module Gear Box
Part #84220790
CCW
$373.70
SEAL
Part #86511201
$9.21
HEX FLNG SCRW
Part #86515926
$3.03
BELT, TRANSMISSI
Part #86627796
$127.64
NUT
Part #87725066
$5.14
DISC
Part #87342192
$61.65
SKID/SHOE
Part #87047426
$39.85
BOLT ASSEMBLY
Part #86571960
$44.25
SPECIAL NUT
Part #86557260
$8.88
CROSS & BEARING
Part #86551252
$206.04
TIE BOLT
Part #86501934
$15.90
BUSHING
Part #87659928
$32.86
BOLT
Part #87040886
$2.78
REPAIR KIT
Part #86511584
$23.06
1431 OPERATORS
Part #86630286
$31.43
BELT
Part #86627810
$114.47
CAP
Part #86633618
$150.47
HUB
Part #86629692
$44.60
NUT
Part #87053834
$5.24
SEAL, WIPER
Part #87027949
$42.44
SERV MANUAL 1431
Part #86592631
$116.21
SMV SPADE W/HDWR
Part #2001033
$2.49
STONEGUARD
Part #87047845
$26.24

Conditioner Rollers

Type: rubber

Disc Cutter Bar

Width of Cut: 13'
Q: What oil do I use in the Disc Modules?

Messick's uses 80W90 GL4 or GL5.

answered by BLK on 11/19/2014
Q: How much oil is in the Disc Modules?

They hold approximately 10 OZ of oil.

answered by BLK on 11/19/2014
Q: How often should I change the oil in the modules?

 Every 300 hours or yearly, which ever comes first.

answered by BLK on 11/19/2014
Q: Can I put a Shock Pro Hub on the drive modules?

 No. Shock Pro can not be used on the drive modules.

answered by BLK on 11/19/2014
New Holland mow max bar explination
video showing the parts of the cutterbar and how they work and go together.
Roll Gap Setting
How to set the roll gap properly.
Machine Setup and Wide Thin Kit
Machine operation, and function of the wide thin kit.
Video on tearing down a cutterbar
video on tearing down a cutter bar.