Virnig HSBP144

$9,139.00 $8,405.00

Item is in stock at Messicks!



  • Electric over hydraulic control allows independent angling of each wing. This also allows the entire blade to be angled separately from the wings for infinite blade and wing angle configurations.
  • Floating frame link maintains full blade contact when wings are angled, while also allowing down pressure when the wings are straight.
  • Oscillation and adjustable cast skid shoes allows edge to follow uneven surfaces.
  • Hydraulic crossover relief valve protects the attachment by absorbing shock and angling the entire blade if a curb or other object is struck.
  • Three blade sections with individual trip edges utilizing eight total compression springs.
  • Middle section comes standard with 5/8” x 8” reversible, replaceable bolt-on wear edge. Design allows for 5-1/2” of total wear.
  • Wings come standard with 1/2” x 7-3/4” reversible, replaceable bolt-on wear edge made from high-tensile steel. Design allows for 5-1/2” of total wear.


Overall Blade Width (Inches) 136.5 148.5 160.5
Blade Height (Inches) 31.0
Blade Angle (Degrees) +/- 30
Wing Angle (Degrees) +/- 60
Width at Full Angle Both Wings Open (Inches) 120.5 131.0 141.5
Width at Full Angle One Wing Open (Inches) 96.5 107.0 117.5
Width at Full Scoop (Inches) 108.5 120.5 132.5
Moldboard Thickness (Inches) 0.19
Cutting Edge (Inches) 5/8 x 8 Bolt-on
Wing Cutting Edge (Inches) 1/2 x 7 3/4 High Tensile Steel, Bolt-on
Blade Oscillation (Degrees) +/- 4
Float Link Angle (Degrees) +/- 5
Approximate Weight (Pounds) 1650 1710 1770
Recommended Loader Capacity Greater than 1800 pounds

Virnig Manufacturing, Inc. products are warranted to be free from defects, in workmanship, for one year from the end user’s date of purchase. Purchased components on Virnig Manufacturing, Inc. products are subject to the warranty of the original manufacturer. This warranty is void on products and components that have been modifed or repaired without the prior consent of Virnig Manufacturing, Inc. This includes disassembling motors, bearing adapters, cylinders, etc. Virnig Manufacturing, Inc. does not warrant damage from misuse, accidents or negligence nor damage to the machine or surrounding environment. Claims are limited to replacement parts and a reasonable labor amount. This warranty does not cover service mileage, downtime or replacement of attachment.

Write Your Own Review

To write a review, please Login or Sign Up

A commercial delivery is a business with 8-5 hours and equipment to unload a tractor trailer truck. Job sites, churches & remote locations are not considered commercial addresses. (Fedex Freight does consider a farm commercial). Commercial carriers will not always call ahead to tell you when a delivery will be made. If you would like the commercial rate, but do not meet the requirements for a commercial delivery you can pickup your shipment from the local freight terminal where they will help you load.

A residential delivery still assumes you have the ability to unload the shipment from a 4' high tractor trailer truck. If you require a lift gate to lower the shipment to the ground an additional $50-125 charge applies for the carrier to send a truck with a lift gate to lower the crate.

Ask A Question

Other Snow Plows (Skid Loader Mount)

LandPride STB1572

72" Snow Trip Blade, designed to fit tractor loaders, 27" Curved 12 Gauge formed Moldboard, Steel Cutting Edge, Universal Skid Hitch, Dual Angling Cylinders, 30-70 HP

See More Information

LandPride STB1584

84" Snow Trip Blade, designed to fit tractor loaders, 27" Curved 12 Gauge formed Moldboard, Steel Cutting Edge, Universal Skid Hitch, Dual Angling Cylinders, 30-70 HP Required

See More Information