HLA Attachments SE5049B500

$540.00 $525.00

Item is in stock at Messicks!

49" Single Bale Spear, Skid Steer Mount.

Single Prong Bale Spear
  • Kverneland tine
  • Easy stabbing & removal
  • 2000 lbs capacity @ 24” L.C.
  • Available with 39” or 49” tine
  • Two stabilizer tines
  • Approximate weight: 165 lbs




All equipment is sold subject to mutual agreement that it is warranted by the company to be free from defects of material and workmanship. But the company shall not be liable for special, indirect, or consequential damages of any kind under this contract or otherwise. The company’s liability shall be limited exclusively to replacing or repairing without charge, at its factory or elsewhere, at its discretion, any material or workmanship defects that become apparent within one year from the date on which the equipment was purchased. The company shall have no liability for related damages of any kind. The buyer by the acceptance of the equipment will assume all liability for any damages that may result from the use or misuse by his employees or others. Distributor/dealer must notify Horst Welding of the defect by phone, fax or email. Recommended repairs and cost are to be discussed with, and agreed on, by an authorized Horst Welding representative. Repair and labor (at an agreed rate) will be performed by a dealer for Horst Welding or a repair shop designated by Horst Welding. All claims must be discussed with a representative of Horst Welding prior to any repairs or warranty will be void. All claims must be accompanied by a photograph of the defective product. All defective products must be returned to Horst Welding in Listowel, Ontario unless directed otherwise by a representative of Horst Welding. Horst Welding Warranty will not apply to:

  • Product that in the judgment of Horst Welding has been misused by the user.
  • Product not sold or manufactured by Horst Welding.
  • Alterations or repairs not authorized by a representative of Horst Welding

Write Your Own Review

To write a review, please Login or Sign Up

A commercial delivery is a business with 8-5 hours and equipment to unload a tractor trailer truck. Job sites, churches & remote locations are not considered commercial addresses. (Fedex Freight does consider a farm commercial). Commercial carriers will not always call ahead to tell you when a delivery will be made. If you would like the commercial rate, but do not meet the requirements for a commercial delivery you can pickup your shipment from the local freight terminal where they will help you load.

A residential delivery still assumes you have the ability to unload the shipment from a 4' high tractor trailer truck. If you require a lift gate to lower the shipment to the ground an additional $50-125 charge applies for the carrier to send a truck with a lift gate to lower the crate.

Ask A Question

Other Bale Handling

Bradco 15892

$2,678.00 $2,410.00


See More Information

Bradco Bale Forks-8 Small Bales Series

$5,346.00 - $6,218.00


See More Information

Bradco Bale Grab Series

$7,541.00 - $7,871.00


See More Information

Bradco Bale Squeeze For Telehandlers 110" Series



See More Information

Bradco LAF1960

$2,879.00 $2,591.00

BALE HUGGER FOR SKID-STEER LOADERS: (clamps loads from 28” to 80” wide)

See More Information

Bradco LAF1960

$2,879.00 $2,591.00

BALE HUGGER FOR COMPACT TRACTORS: (clamps loads from 28” to 80” wide)

See More Information

HLA Attachments BG3000BO500

Round Bale Grabber, Skidsteer Q-Tach, includes hose kit w/flat face couplers, designed for gentle handling of heavy wrapped silage bales, Includes standard 8" stroke implement cylinder, works with up to 5' diameter bales,

See More Information

HLA Attachments BG3000CB500

Round Bale Grabber / 71" max opening width / RH & LH sides open & close simultaneously / includes hydraulic cylinder, hoses & flat-face couplers / 575lb weight

See More Information

HLA Attachments BSD4039

$628.00 $569.00
Item is in stock at Messicks!

Double Prong Bucket Spear with 39" tine

See More Information

HLA Attachments SE5039JD640

39" Single Round Bale Spear, John Deere mounting (6001-700 Series)

See More Information


8 1/2' X 20' Round Bale Hauler with heavy duty 5"x3" HSS cross bars are curved for load stability. The main beams are 8"x4" HSS. Equipped with 245Rx16 Used Truck Tires, holds 8 bales.

See More Information

Steffen 5508

72 x 86 small square bale handler, will pickup 8 flat or 10 on edge, with 20 teeth, lift frame and hydraulic cylinder, SSL mountingNo Hoses or couplers

See More Information


Square bale clamp, SSL clamp, hoses & couplers

See More Information

Woods BS3044S

$590.00 $506.00
Item is in stock at Messicks!

44" Bale Spear, 3000 lbs carrying load, 45mm thick, drop forged steel spears, heavy duty steel plate frame, ideal for moving and stacking large round and square bales

See More Information