Kubota RA2071TEV

Contact Sales | sales@messicks.com | Print Page

FarmLine Rakes
Kubota's FarmLine rakes feature oil-immersed cam discs, guide rollers and tine bearings, alleviating maintenance on these components. All rakes are fitted with curved tine arms, to ensure a regular and even swath formation. Additionally, the curved shape prevents material from being pushed towards the rotor and allows a higher lift out of the swath. Our expert knowledge in producing the right swath, not only optimizes the capacity of the baler, but also increases the quality of the forage.

Kubota TerraLink System
The Kubota TerraLink System provides perfect ground contour following and stability on slopes. The trailed axle configuration enhances quiet running and reduces tractor input power, particularly in wet conditions. It provides superb tracking during road transport. And is absolutely maintenance and wear-free.

Flexible Raking
The trailed RA2071T EVO is designed to work in a variety of crop conditions. The twin rotors work independently from each other, making it possible to collect either one large swath or two smaller swaths. Alternately, the rake can place two large swaths into one, allowing for a total of up to 41' of crop to be gathered into 1 swath.

Kubota Compact Rotor
The rotor is grease lubricated within a fully enclosed housing. The maintenance-free cam track, cam followers, as well as the bearings of the rotor star axles, are permanently running in an oil bath. Both the rotor and pinion shaft are mounted on two bearings for maximum strength and long service life.

Curved Tine Arms
All Kubota FarmLine rakes feature cranked tine arms for significantly cleaner raking performance and optimized swath formation. This design ensures that the row of tines on each tine bar has a more effective approach angle to the oncoming crop, and also gives a cleaner lift out of the tine from the formed swath.

Outstanding Durability
The Kubota rakes are equipped for maximum raking performance. The FarmLine rakes all feature 9mm wire diameter tines for outstanding durability.

Exceptional Raking Performance
Up to twelve tangential tine arms and four double tines per arm provide high tine frequency to ensure clean raking performance – even at reduced rpm and high travel speed. Infinitely variable cam track adjustment allows fine-tuning to obtain optimum raking and swath formation according to crop conditions.

All Functions Controlled from the Cab
All functions can be controlled from the tractor cab. A simple pull of a rope is all that is needed to activate the standard hydraulic lifting of the swath board. And with a 20" lifting height, swaths are easily crossed.

Easy Set for Transport
There's no need to remove tine arms when converting the RA2071T into transport position. The swath board is lifted hydraulically and transport width is reduced to 9'10" (to reach 8'1" the tine arms can be removed).

 

Twin Rotary Rake, 23'4" working width, 9'7" rotor diameter, tandem axle, 18x8.50-8 tires, with (2) extra optional support wheels, fully enclosed oil filled gearbox, detachable tine arms, will rake into single or individual windrows

Share, or Send to Mobile


Send SMS
Send Email
Questions

Like What You See?


Request a quote and one of our salesmen will reach out to you.

Get Quote

Write Your Own Review

To write a review, please Login or Sign Up

A commercial delivery is a business with 8-5 hours and equipment to unload a tractor trailer truck. Job sites, churches & remote locations are not considered commercial addresses. (Fedex Freight does consider a farm commercial). Commercial carriers will not always call ahead to tell you when a delivery will be made. If you would like the commercial rate, but do not meet the requirements for a commercial delivery you can pickup your shipment from the local freight terminal where they will help you load.

A residential delivery still assumes you have the ability to unload the shipment from a 4' high tractor trailer truck. If you require a lift gate to lower the shipment to the ground an additional $50-125 charge applies for the carrier to send a truck with a lift gate to lower the crate.
BX, B, & L series Tractors
(does not include any implements, or loader/ landscaper utility tractors or BX24/BX25, see below)
24 Months or 1500 Hours (whichever occurs first)
(Standard Powertrain – 36 months or 2000 hours, whichever occurs first)
BX24, BX25 Utility Tractors
(except loader, backhoe, and mower deck, see implement warranty below)
24 Months (non-commercial, home and residential use)  
12 Months (Any other usage)  
Promotional Limited Powertrain Warranty on B, BX, and L series Tractors
(excluding B26/L39/L45/L47 models)
72 Months or 2000 Hours (whichever occurs first)
(for non-commercial, home and residential use only). Terms and conditions of standard Limited Warranty apply.  Eligible units must be purchased and registered from dealer inventory beginning June 1, 2016 through July 31, 2016.
 
Loader/Landscaper Utility Tractors
(B26, L39, L45, L47)
(does not include loader/backhoe, see
implement warranty below)
12 Months
(Power train – 24 months or 1500 hours, whichever occurs first)
 
M, MX series Tractors
(does not included any implements, see implement warranty below)
24 Months or 2000 Hours (whichever occurs first)
(Power train – 36 months or 3000 hours, whichever occurs first)
(PowerKrawler tracks – 12 months or 1000 hours, whichever occurs first)
 
Z, F series Tractors, except Z700, Z100 (including mower deck) 24 Months  
Z700 Series (including mower deck) 48 Months or 750 hours (whichever occurs first) (private homeower usage)
24 Months (any other usage)  
(Z700 Seires Kawasaki Engine only - 36 months)*
 
Kommander Z100 series
(including mower deck)
48 Months or 300 Hours (whichever occurs first)*  
G, GR, T series Tractors
(including mower deck)
24 Months (Private Homeowner Usage)  
12 Months (Any other usage)  
W series Commercial Walk Behind Mowers
12 Months*
 
 
SSV Skid Steer Loaders
12 Months
(Engine - 24 months or 2000 hours, whichever occurs first)
 
SVL Compact Track Loaders
24 Months or 2000 Hours (whichever occurs first)
(Rubber tracks – 12 months or 1000 hours, whichever occurs first)
 
K, KX, U, R Series Excavators and Wheel Loaders
24 Months or 2000 Hours (whichever occurs first)
(Rubber tracks – 12 months or 1000 hours, whichever occurs first)
 
RTV Utility Vehicles 12 Months  
Implements and Attachments
(loaders, backhoes, mower decks, etc.)
12 Months
(Snowblowers, Rotary Brooms, and Blades 24 months)+
 
Hay Tools (Disc Mowers, Rakes, Balers, etc.) and Spreaders
12 Months
(Disc mower/conditioner cutterbar and gearbox – 24 months)
 
Replacement Diesel Engines
12 Months
(or remainder of unit warranty, whichever is longer)
 
Replacement parts
90 Days
(or remainder of unit warranty, whichever is longer)

Other Rakes