- Bush Hog Mowers
- Lawn Tractors
- Mowers - Finish
- Mowers - Rotary Cutters & Flex-Wings
- Zero Turn Mowers
Contour 4 Wheel Steer
- Bearings on king pins for absolute no sway trailing
- Includes 2 shoes and 2 Universal Pads
- 2 Ratchet straps to secure load
- 4 Wheel steering
- Safety Chain
- Double Spring Balancer
|Rated Capacity||15,500 lb.|
|Tongue Length||ADJ. 11 to 12' 6"|
|Top Rail Length||31'|
|Maximum Head Size||30'|
|Road Signal Light Kit||Optional|
|Approx. Weight||2,305 lb. (less rims and tires)|
30' Header Wagon, 4 Wheel Steer, 20.5x8-10, 12 ply tires, Rachet Straps, adjustable top rail, bearings in pivot points
A residential delivery still assumes you have the ability to unload the shipment from a 4' high tractor trailer truck. If you require a lift gate to lower the shipment to the ground an additional $50-125 charge applies for the carrier to send a truck with a lift gate to lower the crate.
All equipment is sold subject to mutual agreement that it is warranted by the company to be free from defects of material and workmanship. But the company shall not be liable for special, indirect, or consequential damages of any kind under this contract or otherwise. The company’s liability shall be limited exclusively to replacing or repairing without charge, at its factory or elsewhere, at its discretion, any material or workmanship defects that become apparent within one year from the date on which the equipment was purchased. The company shall have no liability for related damages of any kind. The buyer by the acceptance of the equipment will assume all liability for any damages that may result from the use or misuse by his employees or others. Distributor/dealer must notify Horst Welding of the defect by phone, fax or email. Recommended repairs and cost are to be discussed with, and agreed on, by an authorized Horst Welding representative. Repair and labor (at an agreed rate) will be performed by a dealer for Horst Welding or a repair shop designated by Horst Welding. All claims must be discussed with a representative of Horst Welding prior to any repairs or warranty will be void. All claims must be accompanied by a photograph of the defective product. All defective products must be returned to Horst Welding in Listowel, Ontario unless directed otherwise by a representative of Horst Welding. Horst Welding Warranty will not apply to:
- Product that in the judgment of Horst Welding has been misused by the user.
- Product not sold or manufactured by Horst Welding.
- Alterations or repairs not authorized by a representative of Horst Welding