This will need frozen in order to get it to seat all the way as the original.
6/23/2023 PETERSBURG, KY Steve
(30 minutes)
Preparation to change took the most time. I took a chance and swapped out with the seal without draining the hydrostatic fluid. Jacked up the front of tractor. Pinched off the transmission rubber vent tube. Popped the old seal out with a screwdriver, quickly wiped the seal seating area. Then tapped on the new seal with a large socket. Only lost about a pint of fluid. Maybe I was just lucky but it worked great. The new seal sealed great!!
6/21/2023 MOUNT CLARE, WV WARREN
Unrated
(2 hours)
6/12/2023 CULLOWHEE, NC RICHARD
Unrated
(30 minutes)
Be aware that seal is undersize, or housing is oversized and seal fit's loose in housing. Used copper coat to help with this.
12/15/2022 MORAVIAN FLS, NC DREAM
Unrated
Grease up the outside and inside the groove of the spring. Also grease the inside where the shaft goes through.
This will need frozen in order to get it to seat all the way as the original.
PETERSBURG, KY
Steve