(45 minutes)
Remove wheel and then pound out the roll pin holding the fork in place on top - recommend installing a new pin at same time you replace fork.
11/29/2023 FALLS CHURCH, VA Michael
(5 minutes)
I had to pound out the old one, be careful not to mushroom the top of the old one.
8/26/2023 MERRITT ISLAND, FL William
(30 minutes)
A very easy installation. Most of the time is spent removing the roll pin holding the yoke to the cutter arm. You'll need a 5/16' roll pin punch to remove the old roll pin and install the new.
Remove wheel and then pound out the roll pin holding the fork in place on top - recommend installing a new pin at same time you replace fork.
FALLS CHURCH, VA
Michael