Need to have a bucket under the old rubber pipe to catch hydraulic oil that comes out of the metal pipe. I didn’t do that and had a mess to clean up.
3/22/2024 Homer, GA James
(10 minutes)
for Kubota L2350 & DT models remove the two 10mm or 12mm bolts on top of hydrolic return cap, remove it, clean it, wipe excess hydrolic oil off with rags, wipe off lower metal return hose, install new hose, with snap ring clamps. don’t over tighten bolts on the cap .
Need to have a bucket under the old rubber pipe to catch hydraulic oil that comes out of the metal pipe. I didn’t do that and had a mess to clean up.
Homer, GA
James