(5 minutes)
Used sharpened pencil to stop fuel flow when feed hose was disconnected. Only tools required were wrench to loosen bolt and pliers for clamps.
4/7/2023 MARYDEL, MD RD
Unrated
(30 minutes)
I could not bleed the air from the pump by using the vent valve As shown in the L2501 book. I had to disconnect each of the 3 lines going to the injectors off of the top of the pump to purge the air.
Used sharpened pencil to stop fuel flow when feed hose was disconnected. Only tools required were wrench to loosen bolt and pliers for clamps.
MARYDEL, MD
RD