(15 minutes)
Took me a while to figure this out.
1. Unbolt the grill - 3 12mm bolts
2. Remove Headlamp - 2 Phillips screws
3. The lamp socket has one orientation tab and must be rotated clockwise to seat properly.
4. In my case, I need to bend the metal receiving tabs in the headlamp ever so slightly to allow the plastic socket tabs clearance to rotate without snagging on the thin metal.
Took me a while to figure this out. 1. Unbolt the grill - 3 12mm bolts 2. Remove Headlamp - 2 Phillips screws 3. The lamp socket has one orientation tab and must be rotated clockwise to seat properly. 4. In my case, I need to bend the metal receiving tabs in the headlamp ever so slightly to allow the plastic socket tabs clearance to rotate without snagging on the thin metal.
CASTRO VALLEY, CA
DANIEL