I used a punch and a deep socket to get the old one out and also to put the new one in.
8/16/2023 RUDY, AR Quin
Used my vise and 1-1/4” socket to press in the bushing and seal. If I’d set the socket in before removing the old bushing and seal and marked the depth on the socket, wouldn’t have had to keep removing the socket to ensure I had the bushing past the circlip groove.
2/17/2023 starkville, MS scott
Set gasket then drive or press both gasket and bushing as assembly. My gasket was seized had to use heat to remove.