(2 hours)
The cutter bar is very heavy. If you don't have 2 or 3 guys to help move it around it is difficult. I set the cutter bar on a furniture dolly which allowed me to move it around alone. It also elevated the bar several inches above the ground which made alignment with the gearbox much easier. Obviously you will need to be working on a hard surface floor so the dolly can roll.
The cutter bar is very heavy. If you don't have 2 or 3 guys to help move it around it is difficult. I set the cutter bar on a furniture dolly which allowed me to move it around alone. It also elevated the bar several inches above the ground which made alignment with the gearbox much easier. Obviously you will need to be working on a hard surface floor so the dolly can roll.
MONTROSE, CO
Steve