1:64 Ross Chastain 2023 Kubota ARC NASCAR Diecast
Part # CX12365KUBRZ
Kubota 50th Anniversary Limited Edition Book
Part # CUKT22C-A852
Kubota Orange & Black Cap w/ Tan Mesh
Part # C22-10976
Kubota / Messick's KeyTag
Part # 2002243220001
Messick's Wheel Spinner
Part # MFESPINNER
Kubota "I Like my Tractors Orange" Tin Sign
Part # KT21A-A636
Kubota Felt Pennant - Farm Scene
Part # KT23A-A961
Kubota Magnetic Parts Tray
Part # 77700-02476
14oz High-Performance Polyurea Multi-Purpose Grease
Part # 70000-10701
Kubota Deluxe Wheel Spinner
Part # 77700-01540
Kubota Magnetic Pickup Tool
Part # 77700-02479
Kubota Faux Wax Cotton Frayed Patch Cap
Part # KBT234
Kubota Retractable Utility Knife
Part # 77700-02485
Kubota Orange Twill / White Mesh Cap
Part # 106266
Kubota 50th Anniversary Can Koozie
Part # KBTF009
Kubota 14" x 6-1/4" Magnetic Tray
Part # 77700-03677
14oz High-Performance Synthetic Extreme Duty Grease
Part # 77700-06321
Kubota Black & White Keytag
Part # KT23A-A960
Kubota Vinyl Oblong Key Tag
Part # KT18A-A314
1:64 Ross Chastain 2023 Kubota ARC NASCAR Diecast
Part# CX12365KUBRZ
Kubota 50th Anniversary Limited Edition Book
Part# CUKT22C-A852
Kubota Orange & Black Cap w/ Tan Mesh
Part# C22-10976
Kubota / Messick's KeyTag
Part# 2002243220001
Messick's Wheel Spinner
Part# MFESPINNER
Kubota "I Like my Tractors Orange" Tin Sign
Part# KT21A-A636
Kubota Felt Pennant - Farm Scene
Part# KT23A-A961
Kubota Magnetic Parts Tray
Part# 77700-02476
14oz High-Performance Polyurea Multi-Purpose Grease
Part# 70000-10701
Kubota Deluxe Wheel Spinner
Part# 77700-01540
Kubota Magnetic Pickup Tool
Part# 77700-02479
Kubota Faux Wax Cotton Frayed Patch Cap
Part# KBT234
Kubota Retractable Utility Knife
Part# 77700-02485
Kubota Orange Twill / White Mesh Cap
Part# 106266
Kubota 50th Anniversary Can Koozie
Part# KBTF009
Kubota 14" x 6-1/4" Magnetic Tray
Part# 77700-03677
14oz High-Performance Synthetic Extreme Duty Grease
Part# 77700-06321
Kubota Black & White Keytag
Part# KT23A-A960
Kubota Vinyl Oblong Key Tag
Part# KT18A-A314
Recommend replacing the stock M10-1.25 flange nut with a nylon insert lock nut. Will likely have to order this on-line as most small & big box hardware stores do not carry it. Do not forget to include the washer on the upper bracket (download a parts diagram). Lube in lithium grease and line it up over the hole with forceps to get it to stay in place before inserting the control arm and knob. Also grease the back side of the cam that fits against the bracket. Once the nut is tightened, recommend wiggling the knob back and forth to get the cam to seat in the hole, then retighten the lock nut. About 1/4" should protrude from the threads when fully seated. There will be a small amount of play in the cam and knob when finished. If the knob is too hard to turn, the retention arm that rests against the grooves on the side of the cam can be bent back a bit. Do this carefully and in small increments. If bent too far out, the knob will spin freely and not desired. Get a second set of hands to work the top knob when installing if you can get one, it will make the job go faster.
HOLLAND, MI
Richard