Kubota > Kubota Tractor Accessories > TC820-57510

Watch Videos Installation Tips

$<p>Messicks has over 50,000 Kubota parts in our Mount Joy warehouse. Our computerized inventory system enables us to have stock items packaged and at your door in a moments notice, or we can order in specialized items that may be less commonly used. We have taken the time to categorize frequently used parts so you can easily find common maintenance items for your tractor. If you need help finding specific part numbers call us at <b>877-260-3528</b> or email <a href="\">parts@messicks.com</a>.</p>$

#TC820-57510 Std L-Series Floor Mat. RH HST Transmission.

$51.20

25 In Stock

Weight: 3.54 lbs

Can fit prior models:

L2501
L3301
L3901
L3200
L3800

Click Here for Left Side

This part fits your tractor

This part fits models

Installation Tips

(10 minutes)
Best to trim out the back side of each bolt hole location before installation.

12/29/2023
Higden, AR
Scott

(15 minutes)

10/13/2023
NEWBORN, GA
Mark

Unrated (30 minutes)
The Right hand side did not fit because the pre holes cutouts for the 2 bolts” heads are off by a 1/2 inch and I had to trim it. Worked but disappointing I had to cut on my new mats!

5/19/2023
DIMMITT, TX
Texs

(10 minutes)
Installed on L3400 required minor trimming.

4/28/2023
COWLESVILLE, NY
John

(10 minutes)
Super easy to install. I took a few minutes to wash and dry the metal floorboards to ensure they were clean before installing to minimize additional wear and/or corrosion. I used a bit of water with some dish soap in it to lubricate the rubber studs that go into the floorboard holes to hold the mat in position. A great add to my L2501!

4/7/2023
Choctaw, OK
LEE

(5 minutes)
Holes in the mat doesn’t line up with the pedal limiter.

4/5/2023
SHANNON, NC
Wiley

(15 minutes)

3/1/2023
SUPPLY, NC
Jason

Unrated (10 minutes)
Use a ltle sop on tabs. Makes life .uch esie

2/27/2023
GROVE, OK
DOC

(5 minutes)

2/3/2023
ELWOOD, IN
Bradley

(10 minutes)
Used soapy water / windex to allow the rubber cleats to push through the receiving/ mounting holes. Overall super easy installation. Love the product- the tractor looks great and the mats prevent paint from wearing preventing corrosion

2/2/2023
ADA, MI
Kirt

(5 minutes)
Simple straightforward install. No need to remove pedal. I did remove the forward and reverse travel stop bolts. A little dish soap on the rubber tabs helps the install as well.

12/20/2022
ORANGE, CT
Joseph

(2 minutes)
They are pretty much just lay in place, super easy to install, I am not sure why they didn’t leave a hole for the transmission pedal stop bolts.

12/14/2022
ASHLAND, KY
Dwayne

Unrated
Installed while the tractor was in 30° weather as were the mats, but once I started popping them in the holes it worked fine. Hopped in the driver's seat had no problem with my feet slipping

12/12/2022
HESPERIA, MI
Dorothy

Good quality and Installation was very easy. My only concern is the cutout holes for the treddel pedal do not line up with the stop screws under the pedal.

11/17/2022
Hastings, MN
Jerry

Just put a drop of dawn dishwashing liquid on the little pegs, line up in the correct holes and push right in from the top. Easy as it can be. Looks great!!!

10/27/2022
BENTON, KY
Michael

(20 minutes)
Some of the pull pins are line up with step supports and are harder to pull through

10/17/2022
SAINT ALBANS, VT
Darren

Unrated (45 minutes)
Remove the HST Petal and the two petal stop bolts before beginning the installation.

9/1/2022
Clinton, MS
David

Unrated
Same as anove

8/29/2022
Sullivan , MO
Dallas

Put tabs in holes and pull them from the both until they seat.

8/28/2022
Manitowoc, WI
Scott's

A little soapy water lubricates the rubber knobs that must be pulled through the deck, wich allows much easier installation. Remove treadle pedal stop bolts before installation. --Do not need to replace

8/27/2022
Jamestown, IN
Burks

(5 minutes)
Remove and discard the treadle pedal stop bolts before installation. They are no longer needed due to the thickness of the rubber mat.

8/27/2022
Mathews, AL
Jon

Unrated (15 minutes)

8/27/2022
Oakboro, NC
Lionel

Unrated (10 minutes)
Two things - real important to line up all the rubber tips up with the floor holes before begging to snap them in place. Other suggestion is to clean metal floor first to avoid paint abrasions

8/27/2022
Middletown, MD
Kerry

(10 minutes)
Don’t forget to remove the over travel bolts.

7/16/2022
FOUNTAIN CITY, IN
Warren

Unrated (30 minutes)
Spray soapy water on the floor and the mat and it pushes right on. Hat peddle stop holes do not line up on the l2501 correctly I sharpened the tip of a price of pipe and hammered it against a price of wood and used it as a punch to make a hole in the correct spot

7/16/2022
DORR, MI
Nick

Show all 25

Suggested Products

1:64 Ross Chastain 2023 Kubota ARC NASCAR Diecast

Part # CX12365KUBRZ

#TC820-57510 Std L-Series Floor Mat. RH HST Transmission.

$51.20

This part fits models

Installation Tips

Suggested Products

$10.99

$49.95

$17.95

$2.50

$8.99

$59.95

$12.95

$2.75

$3.55

$7.17

$13.49

$5.18

$19.95

$11.78

$15.95

$4.95

$19.75

$17.61

$1.95

$2.50

Suggested Products

$10.99

$49.95

$17.95

$2.50

$8.99

$59.95

$12.95

$2.75

$3.55

$7.17

$13.49

$5.18

$19.95

$11.78

$15.95

$4.95

$19.75

$17.61

$1.95

$2.50

Other Kubota Parts & Accessories

Other Kubota Parts & Accessories

Videos

Videos