Unrated
(15 minutes)
Tight area, but can be done without removing any parts. Connect the throttle lever first.
9/15/2022 HOSSTON, LA Christopher
(20 minutes)
The worst part of this was trying to find it to buy. This is a throttle cable, not an engine wire. The only good tip that I can give is to install the barrel in the bracket on the lever first. Reason being is because the only way to install it is with the cable being vertical. If you don't do this first, you'll only be fighting the spring and you don't have enough slack in the cable to do so. There's not much room under that fender.
Tight area, but can be done without removing any parts. Connect the throttle lever first.
HOSSTON, LA
Christopher