(10 minutes)
I used silicone grease to allow the seal to glide in and the silicone grease will not effect the seal.
11/9/2023 Kingman, AZ Bob
(1 minute)
9/14/2023 BUCHANAN, MI Joshua
(18 hours)
This O-ring not required for Kubota model BX2230D. Keeping on hand. Kubota Silicone Sealant Gray #70000-73764-620 is required for the BX2230D model front axle gear case cover reassembly. The time stated is from start to finish of the entire project. Nothing easy about any part of this project.
PROJECT: Removed/Repaired/Reinstalled both front axle gear case units on Kubota model BX2230D. R&R both front axle oil seals, R&R both front axle inner & outer bearings, R&R both front axle gear case upper dual-piece oil seals, R&R silicone sealant on both front axle gear case covers (Kubota Silicone Sealant Gray #70000-73764-620), reassembled both front axle gear case units, torqued front axle gear case covers mounting bolts, reinstalled both front gear case units to the front differential case, allowed sealant to cure overnight. The following morning serviced front differential system with 5 quarts 80/90 gear oil. Many various tools required to complete process; hand tools, torque wrench. gear puller, hydraulic press, etc. I found that a Coupling for 2 inch diameter schedule 40 PVC pipe worked nicely installing the front axle gear case upper dual-piece oil seals.
6/11/2023 MARYVILLE, MO DANIEL
Unrated
(30 minutes)
3/11/2023 HARRISVILLE, PA John
Unrated
(1 minute)
MUST have a good solid pair of Angled Snap Ring Pliers !!!!!!! The Chinese ones are junk .
MINOT, ND
Clinton