For effortless turning of tractors and other off-road equipment.
Clamp securely grips all wheels up to 1-1/4" thick.
Installation Tips
3/16/2023 INGRAHAM, IL Leon
Unrated
(3 minutes)
2/27/2023 GROVE, OK DOC
(5 minutes)
Just follow the instructions. Very easy.
2/16/2023 WARREN CENTER, PA JOHN
Unrated
(5 minutes)
Really no tricks or tips, it's very simple to install
11/21/2022 GARRETT, PA Samuel
(15 minutes)
Easy to install just remember, no matter where you clock it, the hydraulic steering doesn't have a true center and the spinner will move around somewhat as there is no gears keeping the wheel at a centered point when going straight.
10/5/2022 ERWIN, TN KATHERINE
(5 minutes)
Instructions were fine.
7/26/2022 LAKE CITY, FL Delton
Unrated
(5 minutes)
Nothing to it. Easy pezzy.
5/3/2022 CRAWFORDVILLE, FL Brian
(15 minutes)
Flip up side down start screws just tight enough where you can flip the knob on top, finish tightening and you are good to go
4/19/2022 FAYETTEVILLE, TN RONALD
Unrated
Even came with an Allen wrench
4/6/2022 YORK, SC Bob
Unrated
(5 minutes)
took longer to open the package than expected
3/15/2022 PORT ORCHARD, WA theodore
(10 minutes)
Kubota L2501 steering wheel needs the long screws that were included with the Spinner. I tried the short screws first, would have taken only a couple minutes to install but had to remove and reinstall with longer ones. I also tried to use the rubber gasket included but don't think it is necessary.
3/9/2022 FORT WORTH, TX CRAIG
(20 minutes)
First tip- don’t drop the screw! 2nd tip- I used half of the rubber spacer on the inboard side of the spinner so that the spin axis was more in line with the axis of the steering wheel.
3/3/2022 SHELTON, WA Doug
(5 minutes)
Super easy to install, game changer with turning in tight spaces!
2/22/2022 GRAYSVILLE, TN Joseph
(10 minutes)
Hardest part was opening the package.
Follow the instructions and the install is a breeze.
Start assembly with the knob upside down to start the screws. The longer screw provided came in handy.
1/29/2022 HANCOCK, NH Erik
Super easy to install.
1/25/2022 BRENTWOOD, TN Dariusz
(5 minutes)
Simple to install, find your spot on the wheel , turn knob upside down to install the screws (leave loose) then rotate the spinner up and finish tightening
INGRAHAM, IL
Leon