(10 minutes)
Took me longer to remove the factory set of Kubota turnbuckle style stabilizers on my BX2680 than it did to install these new Messick style stabilizers!
3/13/2024 SHELBY, MI Paul
Unrated
(5 minutes)
The bars have plenty of alignment hole combinations to fit any length. Jostle your arms/implement a bit if the holes don't quite line up.
2/18/2024 JOURDANTON, TX Jon
(10 minutes)
Huge improvement from the factory installed sway bars, much easier to adjust. Installation is so easy “ even a caveman can do it”
12/21/2023 WHEELING, WV PAUL
(10 minutes)
this is a great addition, replacing the factory turn buckles which come with the Bx series of tractors.
11/15/2023 NASHVILLE, TN Robert
(10 minutes)
Very easy to install! They look well made, and very easy to adjust. Should have bought them when they came out!!
10/24/2023 JEFFERSON, OH Scott
Unrated
(40 minutes)
Super easy installation
8/25/2023 WESTFIELD, PA Richard
(10 minutes)
No tricks just easy
8/9/2023 Adena, OH Rob
(35 minutes)
Installation was easy. Taking off the OEM stabilizers is another story. It took a good amount of effort to get the old cotter pins straight enough to slide out.
7/24/2023 AURORA, IN Eric
(5 minutes)
Super easy install.
Makes a world of difference when you switch implements.
Highly recommend
6/16/2023 MILLINGTON, TN Walker
(10 minutes)
Getting the old cotter pins was the toughest part of the job. The install was a breeze.
6/10/2023 WOBURN, MA JOHN
(10 minutes)
6/1/2023 INDUSTRY, PA mike
(8 minutes)
The hardest part was removing the cotter pins from the old shackles.
5/29/2023 SOUTHSIDE, AL WALTER
(10 minutes)
5/22/2023 MEAD, CO Robin
Unrated
(10 minutes)
Installation is very easy even for me who isn't handy. I had more trouble removing the cotter pins from the turnbuckle.
3/3/2023 PECULIAR, MO William
(20 minutes)
The installation was done quickly with very little effort. Taking the old system off took longer. Great product and would recommend the upgrade.
1/25/2023 Easley, SC Barry
(20 minutes)
Hardest part was removing old cotter pins. Once that was done, the installation was easy! I kept an implement attached during the process to help steady the lift arms. Next to manually adjusting the turnbuckles, this is a simple process. An added plus is that during an implement change, the stabilizers can be extended to keep the lift arms out of the way while repositioning the tractor.
12/28/2022 ASHEBORO, NC RANDY
(17 minutes)
17 minutes to remove original turnbuckle assembly and replace with Messick's Stabilizer Kit. NOTE: I fractured my R arm after placing my order. Removal and install accomplished using one arm exclusively. Instructions are clear, helpful and easy to follow.
11/16/2022 FITCHBURG, MA Michael
(5 minutes)
Have the Messick video in front of you while installing
11/12/2022 Milton, GA James
(5 minutes)
Installation was very easy and they work great.....highly recommend putting these on any tractor with the turn-buckle stabilizers. I think I would rather see a bolt and lock-nut vs. collar pin on the end connections.
11/2/2022 MOBERLY, MO Joe
(10 minutes)
Great kit! Just follow the directions. Hardest part of the whole thing is getting the cotter keys straight enough to pull out of the pins.
Took me longer to remove the factory set of Kubota turnbuckle style stabilizers on my BX2680 than it did to install these new Messick style stabilizers!
SHELBY, MI
Paul