$<p>Messicks has over 50,000 Kubota parts in our Mount Joy warehouse. Our computerized inventory system enables us to have stock items packaged and at your door in a moments notice, or we can order in specialized items that may be less commonly used. We have taken the time to categorize frequently used parts so you can easily find common maintenance items for your tractor. If you need help finding specific part numbers call us at <b>877-260-3528</b> or email <a href="\">parts@messicks.com</a>.</p>$

Kubota #15372-64010 Dynamo/Alternator

Name: Kubota #15372-64010 Dynamo/Alternator
Brand: Kubota
SKU: 15372-64010
Price: 174.96 USD

This part is no longer available, it has been replaced with an updated item.

Product has been replaced by 15372-64014

Weight: 3.70 lbs

*Must order 15263-72920 gasket to go along

element not set

This part fits your tractor

This part fits 11 models

DYNAMO [COMPONENT PARTS]

DYNAMO

FAN/DYNAMO

DYNAMO [COMPONENT PARTS]

DYNAMO

Installation Tips

(3 hours)
The job is pretty straightforward except that one of the six nuts that attach the dynamo is difficult to get to--a bugger to remove and a bit more challenging to put back on. A 10mm ratchet wrench reworked by bending and grinding, and some tape to hold the nut in the wrench was the key for me.

8/6/2024
GLASGOW, KY
Danny

(3 hours)
One nut is not accessible. Get a flat ratchet box end 10mm wrench. It was the only thing I could find to work. When reinstalling put that nut and washer on first.

10/19/2023
WASHINGTON, IL
Howard

(2 hours30 minutes)
make sure you have a 10mm flex head ratchet wrench and a extendable magnet to recover the nuts and washers you will drop into the abyss. have fresh anti freeze on hand. remove hood, radiator and right side engine cover. good time to replace the V belt also. loosen the center tension pulley nut to allow it to adjust with side bolt, don't forget to tighten after setting belt tension!

5/31/2023
LEMONT, IL
Michael

Unrated (4 minutes)
The bottom center bolt is almost impossible to get to. I found out that you can use a 10mm ratchet wrench with a flex head. You will have to be very patient taking off and putting the nut back on. Don't forget to order a gasket as it doesn't come with it I found out.

5/23/2023
Mansfield, OH
Robert

Unrated
What I did was remove radiator take off fan blade I had to use a 10mm ratchet wrench to get bottom nut off slow going big fingers to put the nut back on I had to put blue tape around nut to hold in wrench was slow going but got other than the two nuts at bottom was easy good luck

2/8/2023
SAN TAN VLY, AZ
Marvin

(2 hours)
Once I learned that you need to bend a 10 MM wrench to get that one nut loose underneath, made it real easy.

5/18/2022
SHIPSHEWANA, IN
Delmer

Show all 6