Add a level of precision to your operation this season with the Outback® S-Lite GPS Guidance System. At a fraction of the cost of competitive GPS Systems, the S-Lite is the affordable solution for your operation. It only takes a few minutes. Simply vaccuum cup the console to the cab window, connect power and antenna cables, place antenna on the cab, set swath width and select guidance mode. It's the quick and simple. Utilize the S-Lite for everything from spraying to tillage. And, when you're ready to change to another tractor, combine or sprayer, the S-Lite can be moved in minutes. Now you can add all of the accuracy and costs savings of precision GPS to your operation. The S-Lite is WAAS enabled with no annual subscription fees. With easy installation and set-up, the savings on inputs start the minute your turn it on.

Straight Guidance

Let's Get It Straight -- To do straight guidance, press "Straight Guidance" button. After showing the Outback® S where to start and which direction to go, it takes over and begins guiding on perfectly straight, parallel passes spaced exactly the width entered during setup.

In straight mode, the passes are predefined. Even if the driver gets off on one pass, the mistake won't be repeated on the next pass. The operator can do straight passes in any order, skip some and come back if desired. As the driver moves from one pass to the next, guidance snaps to the next pass automatically.

Contour Guidance

It's Freestyle -- To switch to contour guidance, press the "Contour Guidance" button. Unlike straight guidance, no predetermined lines are established. Contour Guidance guides only off the "last pass". So on the first pass, the Outback® S isn't guiding at all, just recording movements. Once the driver turns around or comes close to a previous pass, it immediately begins guiding along that pass. The Outback® S will guide from any previous pass no matter if it was done in straight or contour mode.