New Holland Hay Equipment H7320 Parts

CNH Direct Ship
KIT
Part #87297012A
CCW
$16.17
Disc Mower Knife
Part #87297010A
CW
$16.17
Wheel Bearing Kit
Part #87298554
$39.33
Bearing Kit
Part #87298429
$97.63
1 Gal SAE 80W-90 Gear Lube
Part #B80902
$21.40
Discbine Knives
CCW 7 DEGREE TWIST (Type 1)
Part #9847684
$1.85
CW 14 Degree Serrted Knives
Part #87029587
$3.65
CW 7 DEGREE TWIST
Part #9847683
$1.85
Kit of 16CW/16CCW - Type 2
Part #86624752
$52.00
V-Knife / Rock Knives
Part #86532078
$3.35
Cutting Knife Kit
Part #86624751
$33.00
CCW 14 Degree Serrted Knives
Part #87029588
CCW
$3.65
CCW 14 DEGREE TWIST KNIVES
Part #86621873
CCW
$1.85
CW 14 DEGREE TWIST KNIVES
Part #86621872
CW
$1.85
Discbine Parts and Maintenance
CW MODULE ASSEMBLY
Part #84220789
$373.70
(#6) TOP CAP ASSEMBLY
Part #87753841
$257.55
CAP w/Shock Pro
Part #87581143
$15.90
Shock Pro Repair Kit
Part #87580643
$47.61
DISC
Part #87646406
$74.31
Short Shaft (248mm)
Part #86519042
$59.96
Long Shaft (268mm)
Part #86519039
$70.73
Top Cap w/Shock Pro
Part #87753842
$241.39
CCW REMAIN MODULE
Part #84220790R
$348.45
CW REMAIN MODULE
Part #84220789R
$348.45
New Holland
HUB
Part #84195890
$56.38
New Holland Hay Parts
Friction Repair Kit
Part #86601404
$125.61
Uncategorized Parts
SMV METAL
Part #2000884
$11.99
SKID/SHOE
Part #84141953
HD
$82.00
NUT G8 P -75
Part #86518194
$1.45
CCW Module Gear Box
Part #84220790
$373.70
SEAL, WIPER
Part #87025444
Lift, Slave
$20.94
KIT, SEALS
Part #87027481
Lift, Master
$51.49
KIT, REPAIR
Part #86534533
$61.24
NUT
Part #87725066
$5.14
SKID/SHOE
Part #87047426
$39.85
HEX FLNG SCRW
Part #86515925
$2.78
BOLT PROTECTR
Part #86510384
$11.66
TIE BOLT
Part #86501934
$15.90
SEAL, WIPER
Part #87025441
Tilt
$28.20
LAMP
Part #86536572
$55.09
BOLT
Part #9790143
$0.62
CROSS
Part #87047945
$198.97
DIA KIT, HARVEST
Part #715289026
$828.20
GREASE
Part #ZRG012WGC
White Lithium Aerosol
$7.16
High Stub Shoe
Part #87622885
High Stub
$98.91
RED LIGHT ASY
Part #86514198
$55.09
SEAL, WIPER
Part #87027952
Tongue Swing
$39.85
SMV SPADE W/HDWR
Part #2001033
$2.49
STONEGUARD
Part #87047845
$26.24

Conditioner Rollers

Adjustment: Adjustable rotor hood
Diameter: 22 in
Drive: 4 HB V-belt
Length: 90 in
Speed: 1016 rpm
Type: Flail rotor with 90 tapered flails

Dimensions

Operating Height: 4' 5" ft
Operating Length: 17' 2" ft
Operating Weight: 3,740 lbs
Operating Width: 14' 10" ft
Transport Height: 5' 8" ft
Transport Length: 17' 7" ft
Transport Width: 9' 11" ft

Disc Cutter Bar

Cutting Height Adjustment: 0.95 to 3.2 in
Cutting Height Control: mechanical or hydraulic
Cutting Height Range: 2 to 10 degrees
Disc Speed: 3000 rpm
Knives per Disc: 2
Number of Discs: 7
Swath Width: 6 ft 0 in
Width of Cut: 3 to 6 ft

Speed

Operating Speed: 0 to 9 mpg
Transport Speed: 20 mph

Tractor Requirements

PTO HP: 65 HP
PTO Speed: 540
Q: What oil do I use in the Disc Modules?

Messick's uses 80W90 GL4 or GL5.

answered by BLK on 11/19/2014
Q: How much oil is in the Disc Modules?

They hold approximately 10 OZ of oil.

answered by BLK on 11/19/2014
Q: How often should I change the oil in the modules?

 Every 300 hours or yearly, which ever comes first.

answered by BLK on 11/19/2014
Q: Can I put a Shock Pro Hub on the drive modules?

 No. Shock Pro can not be used on the drive modules.

answered by BLK on 11/19/2014
New Holland mow max bar explination
video showing the parts of the cutterbar and how they work and go together.
Roll Gap Setting
How to set the roll gap properly.
Machine Setup and Wide Thin Kit
Machine operation, and function of the wide thin kit.
Video on tearing down a cutterbar
video on tearing down a cutter bar.