Virnig XBC42-25
The Virnig XBC42-25 Excavator Mount is a 42" mini excavator rotary brush cutter with a 4" cutting capacity, 2" minimum cut height, 15-25 GPM recommended flow, and 3,500 PSI max operating pressure. It features a direct-drive Eaton motor with relief valve protection, no case drain requirement, rounded flywheel with three double-sided blades, bolt-on mounting interface, motor guard, spindle guard, and optional side curtains. It is ideal for clearing brush, small trees, trails, fence rows, drainage ditches, pond banks, slopes, field edges, and other hard-to-reach areas.
Get a Quote
Ask a Question
Series Models
XBC42-25
The Virnig XBC42-25 Excavator Mount is a 42" mini excavator rotary brush cutter built for clearing brush, small trees, trails, ditches, slopes, pond banks, and other hard-to-reach areas.
Series Models
XBC42-25
The Virnig XBC42-25 Excavator Mount is a 42" mini excavator rotary brush cutter built for clearing brush, small trees, trails, ditches, slopes, pond banks, and other hard-to-reach areas.
Mini Excavator Rotary Brush Cutter
Virnig XBC42-25 Excavator Mount
The Virnig XBC42-25 is a 42-inch mini excavator rotary brush cutter built for clearing brush, small trees, trails, fence lines, drainage areas, and hard-to-reach vegetation with controlled excavator-mounted cutting performance.
42" Cut Width 4" Cut Capacity 15-25 GPM Mini Excavator Mount
Quick Specs
- 42" cutting width
- 4" diameter cutting capacity
- 2" minimum cut height
- 20.5" overall height
- 52.5" overall depth
- 15-25 GPM recommended flow
- 3,500 PSI max operating pressure
- Approx. 700 lb weight without side curtains
Product Features
- 42" rotary cutting width is sized for mini and midi excavator brush clearing.
- Direct-drive Eaton motor with relief valve protection requires no case drain.
- Rounded flywheel with three double-sided blades helps bounce off stumps and process material.
- Bolt-on mounting interface allows hanger brackets to be changed for different excavator brands.
- Standard motor guard and spindle guard help protect key components in rough cutting conditions.
Improvements & Advantages
- Excavator-mounted design reaches slopes, ditch banks, pond edges, and tight areas a skid steer may not access.
- Unique bolt-on front deck can be removed for increased blade engagement.
- Serrated rear deck supports back dragging brush and grubbing small stumps.
- Optional side curtains help increase debris containment when working near sensitive areas.
- 15-25 GPM motor package is built for clean cutting speed in lighter brush and vegetation.
Application & Field Use
- Clearing brush, grass, weeds, saplings, and small trees up to 4" diameter.
- Maintaining trails, fence rows, drainage ditches, pond banks, and field edges.
- Reaching over guardrails, down slopes, around obstacles, and into tight work zones.
- Useful for farms, municipalities, contractors, landowners, and property maintenance crews.
- Best matched to compatible mini excavators with proper hydraulic flow and cab protection.
Built for Hard-to-Reach Cutting
The Virnig XBC42-25 gives mini excavator operators a compact, powerful brush cutting attachment for areas where reach and control matter. Its direct-drive motor, protected spindle, rugged flywheel, and excavator mounting system make it a strong fit for slope work, ditch cleanup, and rough vegetation management.
- Helps reduce hand clearing in difficult terrain.
- Works well where skid steer access is limited.
- Designed for controlled cutting from the excavator cab.
Why Choose the XBC42-25?
- 42-inch mini excavator cutting performance
- 4-inch brush and small tree capacity
- No case drain required
- Protected motor and spindle design
- Built for ditches, slopes, trails, and field edges
Virnig XBC42-25 Excavator Mount Rotary Brush Cutter
A 42-inch mini excavator brush cutter built for controlled vegetation clearing, hard-to-reach mowing, and rugged land maintenance.
