(10 minutes)
There is a dimple on the tractor seat where the screw and shim that holds the screw should go. I used a battery powered ratchet and one of the included screws to "drill" out the dimple in the seat then put the shim over the hole. It was then very easy to screw the arm rests to the seat because the hole was pre-drilled.
There is a dimple on the tractor seat where the screw and shim that holds the screw should go. I used a battery powered ratchet and one of the included screws to "drill" out the dimple in the seat then put the shim over the hole. It was then very easy to screw the arm rests to the seat because the hole was pre-drilled.
Valparaiso, NE
Keith