Field Ready >
65930FR
#65930FR Bushing
$12.33
36 In Stock
Weight: 0.10 lbs
Field Ready 65930FR replacement bushing.
Also commonly referred to as a sleeve bushing depending on the application.
element not set
This part fits your tractor
This part fits 0 models
Installation Tips
(30 minutes)
Use a curved edged punch to bend the sides of the old bushing inward, all around the perimeter, then use a large blunt punch to knock out
Use a curved edged punch to bend the sides of the old bushing inward, all around the perimeter, then use a large blunt punch to knock out
6/3/2022
Stover, MO
David
Stover, MO
David
12in Kubota Sticker Decal
Part# K2771-65122
70
in Stock
$3.99
Kubota Black Twill w/ Tan Mesh Cap
Part# KT19A-H366
45
in Stock
$12.95
Kubota 12oz Urban Tumbler
Part# 2004625470001
5
in Stock
$24.95
Deluxe Steering Wheel Spinner Knob for Tractors
Part# 77700-01540
100+
in Stock
$13.23
1:64 Ross Chastain 2024 Kubota No. 1 Chevrolet Camaro Diecast
Part# CX12465KUBRZ
64
in Stock
$10.99
Kubota Tire Tread Counter Mat
Part# KT23A-A966
6
in Stock
$29.95
Kubota Oval Key Chain
Part# 2002309110001
2
in Stock
$5.95
1:18 Kubota SVL90-2
Part# 77700-03891
13
in Stock
$30.14
Kubota 80-Piece SAE Grease Fitting Kit
Part# 77700-06282
23
in Stock
$36.02
12in Kubota Sticker Decal
Part# K2771-65122
70
in Stock
$3.99
Kubota Black Twill w/ Tan Mesh Cap
Part# KT19A-H366
45
in Stock
$12.95
Kubota 12oz Urban Tumbler
Part# 2004625470001
5
in Stock
$24.95
Deluxe Steering Wheel Spinner Knob for Tractors
Part# 77700-01540
100+
in Stock
$13.23
1:64 Ross Chastain 2024 Kubota No. 1 Chevrolet Camaro Diecast
Part# CX12465KUBRZ
64
in Stock
$10.99
Kubota Tire Tread Counter Mat
Part# KT23A-A966
6
in Stock
$29.95
Kubota Oval Key Chain
Part# 2002309110001
2
in Stock
$5.95
1:18 Kubota SVL90-2
Part# 77700-03891
13
in Stock
$30.14
Kubota 80-Piece SAE Grease Fitting Kit
Part# 77700-06282
23
in Stock
$36.02
I placed the bushings in the freezer overnight. Ambient temperature was low 60's in the morning. I then gently tapped bushing with 1 lb dead blow hammer to start bushing into hub. Then hammered the rest of the way until flush.
CAMERON, SC
Paul