Unrated
(15 minutes)
Installation is pretty straight forward. You can try to remove the blade bolts via the access hole in the deck, but I have found it's easier to just remove the whole assembly from the shaft and work on it on the bench.
When removing the weldment bar that the pan and the blade bolt to, be sure that the collar that makes the seal is in place.
Installation is pretty straight forward. You can try to remove the blade bolts via the access hole in the deck, but I have found it's easier to just remove the whole assembly from the shaft and work on it on the bench. When removing the weldment bar that the pan and the blade bolt to, be sure that the collar that makes the seal is in place.
STOCKBRIDGE, GA
Francis