(10 minutes)
Had the implement close to the shop and used an impact wrench for removal. Without an owner's manual I reassembled to specs noted before disassembly. Mainly spring tension. This was done by measuring the amount of threads sticking out past the locknut. While apart, I checked for full range of motion of the shank on the pivot shaft, cleaned and lubricated as needed
8/5/2023 ALBURNETT, IA Aaron
(10 minutes)
Had the implement close to the shop and used an impact wrench for removal. Without an owner's manual I reassembled to specs noted before disassembly. Mainly spring tension. This was done by measuring the amount of threads sticking out past the locknut. While apart, I checked for full range of motion of the shank on the pivot shaft, cleaned and lubricated as needed
Had the implement close to the shop and used an impact wrench for removal. Without an owner's manual I reassembled to specs noted before disassembly. Mainly spring tension. This was done by measuring the amount of threads sticking out past the locknut. While apart, I checked for full range of motion of the shank on the pivot shaft, cleaned and lubricated as needed
ALBURNETT, IA
Aaron