(20 minutes)
Drilled out the peened indentations on the old plow point with a 5/16 drill and then tapped it off with a hammer and drift. Marked the location on the new point with a pen and then locked it into place by peening it with a ball bearing from an empty spray-paint can and a hydraulic press.
Drilled out the peened indentations on the old plow point with a 5/16 drill and then tapped it off with a hammer and drift. Marked the location on the new point with a pen and then locked it into place by peening it with a ball bearing from an empty spray-paint can and a hydraulic press.
STATE COLLEGE, PA
MICHAEL