#F58601 Grinding Face Shield Assembly with Ratchet Headgear

Forney F58601 is a complete grinding face shield assembly with ratchet headgear, also called a grinding shield. It features a lightweight design for comfort and meets American National Standards Institute (ANSI) Z87.1 safety standards.

• Shield size: 15-1/2 in. x 8 in. (393.7 x 203.2 mm)
• Headgear features push-and-turn ratchet sizing adjustment
• Not for oxy-acetylene welding

Important safety information:

• Face shields are considered secondary protection and require protective eyewear or goggles.
• Because the shield does not fully enclose the face, protective eyewear should also be worn to help safeguard the eyes.
• Face shield visors are not shatterproof.
• When large objects or objects traveling at high speed strike face shields, the visor may break or become compromised and cause injury to the face or eyes.
• Workers should avoid areas where such hazards exist, or use extreme caution if they cannot be avoided entirely.
• Routinely check face shields for damage, and do not wear a face shield that has sustained damage.
• Workers performing tasks in which flying sparks or particles are present should wear protection to shield the face and head.
• Visors and face shields do not reflect infrared heat.
• They are not recommended for radiant heat hazards, including welding applications.