$<p>Messicks has over 50,000 Kubota parts in our Mount Joy warehouse. Our computerized inventory system enables us to have stock items packaged and at your door in a moments notice, or we can order in specialized items that may be less commonly used. We have taken the time to categorize frequently used parts so you can easily find common maintenance items for your tractor. If you need help finding specific part numbers call us at <b>877-260-3528</b> or email <a href="\">parts@messicks.com</a>.</p>$

#77700-03363 Kubota BX/ZD Series Filter Maintenance Kit (BX2200, BX2660, ZD28)

Name: Kubota #77700-03363 Kubota BX/ZD Series Filter Maintenance Kit (BX2200, BX2660, ZD28)
Brand: Kubota
SKU: 77700-03363
Price: 81.48 USD
Availability: InStock

$81.48

38 In Stock

Weight: 3.70 lbs

Kubota 77700-03363 BX/ZD series filter maintenance kit for the following models: BX2200, BX2660, ZD28.

Application

Diagram: BX ZD FILTER KIT
Section: Accessories

Kit contents

element not set

This part fits your tractor

This part fits 3 models

BX ZD FILTER KIT

Product Specifications

Property	Value
Product Series	BX
Product Series	Z
Filter Kits	BX22D, BX2200, BX2660, BX2670, ZD28

Installation Tips

(30 minutes)
Like a car, you will need basic tools like a filter wrench, and a pair of needle nose or similar pliers. I use a strap wrench for the spin on filters for the Oil and Hydrostatic Trans fluid. The adjustable strap will work on removing both filters. The needle nose or similar pliers are for loosening the band clamps for both fuel filters. The fuel filters are directional from the fuel tank to the engine. The filters have an arrow on the plastic housing that indicates direction of flow to the engine. There are two fuel filters on my BX tractor. One on the left side of the engine as you sit on it and the other under the floorboard below the driver's seat. The air filter fits one way in the housing and takes just a minute to replace. I have to remove the engine guard from the front of the tractor and the panel that covers the engine below the hood to get to the front fuel filter for replacement. That adds a few minutes to the install. The engine side cover is fastened by two threaded bolts with a plastic turn knob under the engine hood that will release the cover that can then be slid forward and off the front of the tractor. When replacing the side cover it needs to be replaced as it was removed by sliding it forward from the front into channels on both sides of the engine housing. The engine cover has attached slides on each side that guide the cover back to its normal position and then is secured by the two turn knobs.

10/31/2025
Kingman, AZ
John

Unrated (30 minutes)
I took the belly mower out and pinched off the fuel line. This made it easy to change the filters.

4/4/2024
Trenton, IL
David

(15 minutes)

12/29/2022
FALLBROOK, CA
Fred