(5 minutes)
Remove bucket or other attachment and raise loader arms to comfortable working height.
Using a 15mm wrench, loosen bolt holding right front bucket cylinder pin. Be sure to retain bushing. Remove existing pin and install this pin. Use grease or assembly lube. Replace bolt, bushing and nut, and tighten securely.
Install grease fitting 75599-81521 and tighten securely with 8mm socket.
3/5/2024 Manchester, OK Peter
Unrated
(10 minutes)
Once partially inserted, I used a dead blow hammer to set in place. Wasn’t sure these were the correct pins because the LA435 loader was delivered with the wrong one installed. They used two pair of the longer pins found on the Swift-Tach legs.
Remove bucket or other attachment and raise loader arms to comfortable working height. Using a 15mm wrench, loosen bolt holding right front bucket cylinder pin. Be sure to retain bushing. Remove existing pin and install this pin. Use grease or assembly lube. Replace bolt, bushing and nut, and tighten securely. Install grease fitting 75599-81521 and tighten securely with 8mm socket.
Manchester, OK
Peter