#7J266-63402 KIT SEAL 1 (2326

(2 hours)
The 2 hours I show for this task includes rebuilding both cylinders. I didn't have a spanner wrench, so I used a vise grip chain wrench and a cheater pipe to loosen the rod caps before removing them from the loader frame. Removed old seals with o-ting pick. Installed new seals. The toughest was the main teflon seal on the piston. That was a huge pain to get on, but don't give up. Reassembly was smooth. Make sure the grease fitting is on the bottom side when you put the pin through. Average person might struggle some but can be done. I have rebuilt thousands of hydraulic cylinders over the years and this kit is complete and comes very high quality seals. New seals look exactly like the old seals. My advice is to go slow and take your time.

1/16/2024
CLEVELAND, AL
RONALD