Kubota #K1122-62280 Electrical System Switch
$8.25
Manufacturer: Kubota
Part Number: K1122-62280
This part is an electrical switch (also shown in some parts diagrams as switch/sensor).
Common applications: Used in the Electrical System (diagram name often listed as Switch or Switch/Sensor) across a wide range of Kubota equipment, including many B Series and BX Series tractors, LX Series tractors, and select GR, T, and TG Series lawn/garden tractors.
Please confirm fitment by matching your model and the parts diagram for your machine.
This part fits 125 models
Installation Tips
MEQUON, , WI
CARL
Verify Seat Position Clearance Gap to Switch. Clean Connector with Electrical Spray Cleaner. Add Electrolytic Grease to Contacts.
MANSFIELD, MA
PHILIP
Deadman switch was very simple - 5 minutes. The tilt switch required a bracket to be removed and that took about 10 minutes. Please invent a forcefield that will keep the rats out of my tractor!
Sonoita, AZ
CATHERINE
Lift seat and detach wiring harness with small screwdriver. There is a lock under the switch and the plug that goes into the switch. Lift up on tab and the plug comes out easily. Using the screwdriver the switch can easily popped out the the seat frame.
Naguabo, PR
Richard
seat switch, plug and play.
LOCUST GROVE, GA
BRIAN
Resources
How to check the safety start switches on a Kubota BX1880, BX2380 or BX2680 every 50 hours, what a failed test means, and the parts in the starting circuit.
How to test the operator presence control system on a Kubota BX1880, BX2380 or BX2680 every 50 hours, what a failed test means, and the parts in the OPC circuit.


super simple...directly under the tractor seat
GREENWELL SPRINGS, LA
John