(1 minute)
Secure the lenses with a zip tie so when you are mowing brush in the brush the lenses aren’t brushed off into the brush mower.
6/11/2024 BELLFLOWER, MO Dwight
(5 minutes)
These lenses are specific because there is a notch on one side that has to meet the bolt area of the light fixture. The trick is that these lights are mounted upside down on some kubota tractors. So if you are looking at a different model series but can tell it is the same light fixture...right-rear might not be Lens or vice versa because it is mounted differently than the B series.
6/6/2024 GRANDY, NC William
Unrated
(1 minute)
Snaps. right in, no problem. But it is only one lens, 1/2 of the light. You need two to repair the whole light.
8/14/2023 LINCOLN, AL Michael
Unrated
(5 minutes)
Used hands to snap into place. Considered using glue, as original fell off (somehow), but new lens appears secure.
1/17/2022 WILSONVILLE, OR Frigaard
Unrated
(15 minutes)
After installing put Zip Ties around the pair to keep brush from removing them when working in the woods.
Secure the lenses with a zip tie so when you are mowing brush in the brush the lenses aren’t brushed off into the brush mower.
BELLFLOWER, MO
Dwight