#K5351-42110 Anti-Scalp Rollers (greaseable)

Unrated (10 minutes)
It was a perfect fit! What I did to help keep the dirt out of the greased part of the axle was to tighten the bolt until it felt resistance turning. This way it keeps it tighter from grass and dirt getting in more. I also added a flat washer so both sides of the wheel had a washer to spin against. Hopefully to help with wear. I will check these often to keep that snug fit as well.

8/28/2024
PRINCETON, IL
David

Unrated

8/14/2024
FLEETWOOD, PA
BREYER

(10 minutes)
clean and grease the bolt

5/23/2024
JANE LEW, WV
BUZZ

12/16/2023
Northport, AL
HAROLD

(15 minutes)
Easy installation.

12/15/2023
LEXINGTON, VA
Keith

(15 minutes)
Leave the adjuster spindles on the deck for better leverage in loosening the nuts on the axels.

11/17/2023
WILLIAMSON, NY
james

(30 minutes)
The axle in which these rotate, is threaded into the height adjustable post. It is then secured with another nut on the threads that extend from the axle. Ensure you remove this nut before unthreading the axle from the adjustable post.

8/2/2023
CONSTANTIA, NY
GREGORY

(15 minutes)
Just a 17mm and a 24mm wrench (15/16 will do the trick also instead of 24mm) and you can change and grease all 4 wheels in less than 20 minutes. I would recommend ordering and replacing the axle bolts at the same time...

6/22/2023
BLAIRSTOWN, NJ
Steve

1/11/2023
MOORE, OK
JUSTIN

(15 minutes)

10/6/2022
SHEBOYGAN, WI
TODD

(5 minutes)

7/5/2022
HARRIMAN, TN
MICHAEL

(2 minutes)
It took about 2 minutes for each wheel, removing the old one and installing the new one. The installation was pretty straight forward... just one bolt (axle). I reused the nut and lock washer. After the installation I greased the wheels through the grease fittings and made any adjustments to level the wheels off concrete surface.

5/20/2022
KATY, TX
CHARLES

took longer to find tools needed

4/26/2022
Ellsworth, KS
Paul

(10 minutes)
Clean area before installation. Study diagrams to be sure for proper installation. Have the proper tools.

4/9/2022
MORRIS, PA
Mark