Kubota #TA040-43900 Electrical Switch

(15 minutes)
Tools required: ratchet, 10mm socket, 12mm socket, #2 philips screw driver. Remove the front and rear covers from the steering column. Remove the screw that holds the switch to the mounting bracket. Remove the two screws from the bottom of the instrument cluster. Remove the two bolts at the top of the instrument cluster. Remove the two bolts that hold the side cover and gently pull the cover out and forward to gain access to the wire connectors of the switch. Unplug the switch connectors from the old switch and then plug in the connectors for the new switch. Reassemble in reverse order. It's actually easier than it sounds! :)

5/17/2023
LOCKHART, TX
Rex