(4 hours)
Remove plunger, then 1/2 hex nuts from under baler, push up plow bolts and old rail is free
Blow off all hay chaff
Chip, scrape and if needed grind and shim to get mating surface flat for new part.
Spray paint with zinc rich primer to slow more rust.
Verify clearances of plunger (too loose is better than too tight, but get it close)
Remove plunger, then 1/2 hex nuts from under baler, push up plow bolts and old rail is free Blow off all hay chaff Chip, scrape and if needed grind and shim to get mating surface flat for new part. Spray paint with zinc rich primer to slow more rust. Verify clearances of plunger (too loose is better than too tight, but get it close)
POESTENKILL, NY
THOMAS