#87311846 KIT, SEALS

(30 minutes)
Call Mesick's first thing before you order! I ordered 2 sets of seals on my own first before getting the correct one after talking to them. Break the top cap off before you remove the cylinder from the tractor if possible. I was able to just drop the cap end of the cylinder and remove the piston. Didn’t have to completely remove the cylinder and break all the hoses loose (until reassembling the piston in the cylinder to let the pressure off) I think I just got lucky getting the new seals in correctly. Saw a lot of conflicting info on the web. Didn’t even realise one of the seals was two parts seated together until the second cylinder. Went ahead and changed the fluid and filter while I had it all apart.

12/9/2025
BETHEL, OH
Matthew

Unrated
ONE STEP AT A TIME , CLEAN UP GOOD ,TAKE PIC FOR REF. , BE CAREFUL TO PLACE ANGLED SILLS IN CORRECT DIRECTION TO SLIDE OVER ROD , EVERYTHING WENT GOOD FOR ME IN THE END BUT I DID PLACE THE ANGLED SILL IN THE WRONG DIRECTION BUT WAS ABLE TO TURN IT AROUND WITHOUT TOO MUCH TROUBLE , IT IS A STRESSFUL WORK IF NOT EXPERIENCED , I WILL DO IT AGAIN

2/18/2025
Roxboro, NC
Harvey

(30 minutes)
Used a seal twister it was original parts

8/28/2022
Alice, TX
Robert