#LDR5033906 KIT, SERVICE

Unrated (5 minutes)
This is the replacement for the bellows on the loader lift control. There are some things to be careful of. Removal of the knob can be difficult as it may have some corrosion on the threads. It unscrews, although it may not feel like it will. A band wrench will help if needed. Be careful not to put too much torque on it as the other end is in a casting. Once you have gotten that off the removal of the old one is not hard. I would recommend a little WD40 on the new boot/bellows to ease install. Make sure that the bottom edge of the boot is seated all the way around. When you use the zip tie to hold it on, make sure it is seated in the grooves and did not ride up and over the base. (Mine did that and I had to take a tiny screw driver to release the zip tie and try again.

8/2/2022
OVIEDO, FL
William