(15 minutes)
There are two tough tough issues with this installation caused by the hood hinge support bracket interference. 1) the forward most screw is difficult to get a bite into. I used a good small diameter phillips screwdriver. 2) The bracket interferes with removal of the unit and the rheostat is a tight fit in the tank. The swing arm goes toward the starboard side. Lift the unit straight up and aft. Keep wiggling it up and past the bracket. then tip to starboard, lift an pull the float out.
FYI the OHM range of this unit is 103-117 empty; 1-5 Full.
There are two tough tough issues with this installation caused by the hood hinge support bracket interference. 1) the forward most screw is difficult to get a bite into. I used a good small diameter phillips screwdriver. 2) The bracket interferes with removal of the unit and the rheostat is a tight fit in the tank. The swing arm goes toward the starboard side. Lift the unit straight up and aft. Keep wiggling it up and past the bracket. then tip to starboard, lift an pull the float out. FYI the OHM range of this unit is 103-117 empty; 1-5 Full.
W BLOOMFIELD, MI
DANIEL