#52881 Spindle Assembly Repair

Single handed. Put the blade on first so you don't have to be on your back. I lined my blade up to a 2x6 and placed the unit on it. I lowered my deck a little at a time while adjusting the spindle until it cleared the mounting hole. Drop it close enough to get a bolt in it and you're good. Getting the old one off is a bit different. To get the pully off, the inner flanged keyed sleeve must be removed first. I struggled with the first one (3) trying to get it off in one piece. Hope this helps.

7/7/2022
HAMPSTEAD, NC
Mike

Unrated
The Spindle was very easy to install However, installing the new belt pully and sleeve was impossible, I had to reuse my original pulley.

5/10/2022
Rockwall, TX
Greg