New Holland TZ-Series - Changing Oils and Filters (Pictures are of a TZ18 / TZ22 / TZ25 , Concepts apply to other similar models) |
Changing the Engine Oil and Filter
Oil Capacity – 3.5 quarts (3.3 liters) Change oil and filter after first 50 hours and every 100 subsequent hours under normal conditions. If operating under sever conditions change every 70 hours after the first change.
|
Changing the Primary Fuel Filter
Replace primary fuel filter after every 300 hours of use |
Draining the Secondary Fuel Filter
Drain secondary fuel filter after every 100 hours of use
|
Changing the Fuel Filter (Diesel)
Replace fuel filter after the first 50 hours of use, and then after every 200 subsequent hours |
Bleeding the Fuel System (Diesel) Fuel system needs to be bled for the following reasons:
To bleed fuel system:
|
Bleeding the Injector Lines Injector lines need to be bled for the following reasons:
To bleed injector lines:
|
Changing the Air Cleaner Elements Outer Element
Outer element needs to be cleaned after every 100 hours of use under normal conditions. Clean more often if operating in excessively dusty conditions. Outer element should be changed after every 6 cleanings, or once a year Inner Element
Inner element should be serviced as often as the outer element |
Changing the Transmission, Rear Axle, and Hydraulic System Oil
Oil capacity – 13.8 quarts (13 liters) Change transmission, rear axle, and hydraulic system oil after every 300 hours of use During cold weather operation New Holland F200 oil can be used as it flows easily in low temperatures and can be used year round
|
Changing the Hydrostatic Transmission Filter
Hydraulic filter should be replaced after the first 50 hours of operation and then after every 300 subsequent hours For operations at or below 0°F a special cold weather HST filter is available (part number SBA340500980)
|