Unrated
(30 minutes)
Use some quick heat to help remove the bearings using a 5/8” wrench. I used a propane torch for about 5 seconds. Also check the block guides( 4 of them) for left to right play relative to the feeder rails. Add spacers to keep the feeder assembly centered. The guide blocks are attached with a 7/16” bolts. Lubricate the rails.
Use some quick heat to help remove the bearings using a 5/8” wrench. I used a propane torch for about 5 seconds. Also check the block guides( 4 of them) for left to right play relative to the feeder rails. Add spacers to keep the feeder assembly centered. The guide blocks are attached with a 7/16” bolts. Lubricate the rails.
LYMAN, ME
George