#1391901 SPUR GEAR 59T CP

Unrated (1 minute)
changed bearing with snap ring only. Thanks Rick, Machine is back together. You can’t just press the bearing in with a press. You have to start the bearing in and I held the snap ring tight in the groove of gear with my fingers and it slides together without much trouble. You can spring the snap ring to make it a little larger to fit tighter in groove of gear also makes it easier. I also had to touch cut the old bearing out by cutting the inner race first then tap the ball bearings out along with inner race. Next cut the outer race and tap it out as well. Would be a lot easier now that I’ve done it.

7/7/2022
Neodesha, KS
Monte