Used Equipment
>
Construction Equipment
>
Skid Loader & CTL Attachments
>
Erskine 1812
Used ERSKINE 1812
800-222-3373 | sales@messicks.com | Print Page
sales@messicks.com
72" snow blower, hydraulic drive motor with electric control box for chute control, Universal skid steer mount.
Recent Trades
Baumalight - RSS580
Stump grinder / Screw Splitter. The Baumalight RSS580 is a screw splitter attachment for skid steers designed to split logs and wood. It's a heavy-duty tool with a planetary drive, hydraulically driven motor, and a 2" hex shaft or flange mount. The splitter can be used for both horizontal and vertical splitting. RSS Skidsteer models have a Stump Planer tool that is designed to mount using a Skidsteer plate. The RSS model operates at a low RPM so that chips are contained during the operation with very little mess to clean up. Ideal for urban areas or confined spaces, the Stump Planer requires less power as it does not produce as fine material as a high speed cutting wheel. This enables larger stumps to be ground faster with smaller carriers, creating better mulch for other small trees. The Stump Planer tool features a hardened replaceable tip for extra-long wear and sharpenable cutting blades.
View 
Baumalight - SWA750-HX570
SWA750HX570 Skid Wing Mower, 42" rotary style cutter head, 7 foot reach, 30-40 GPM required oil flow, like new, only used one time, 4 1/2" - 7 1/4" cutting capacity based off hydraulic flow, will trim trees, mow over a guard rail, universal skid loader mounting, see link for more details - https://baumalight.com/product/boom-mower-skidsteer/swa750
- Compare to new at over $24,000.00!
View
Bobcat - 60
60" Bobcat V-Blade, folds back to approx 48" for side walks. Skid loader hookup with Bobcat 8-pin electrical plug. Great physical shape.
View
Brown Welding - Post Pounder
This post driver setup has been designed especially for driving tall posts in orchards or vineyards where narrow row spacing and uneven terrain are a problem. The post driver can be carried by 3-point forks or a front lift. This allows it to be hooked up and unhooked in minutes. An adjustable bottom support gives the unit stability, allowing the operator to drive posts with the frame sitting on the ground. This frame also supports the unit when it is unhooked from the tractor. A four lever control valve allows the operator to adjust the tilt in both directions as well as 3 foot of travel side to side of the tractor. This allows the tractor driver to travel straight down the row, with less maneuvering resulting in faster post installation saving both time and money.
Features:
Impact: 30,000 lbs, Max post width: 7?, Adjustable for different post heights, Hydraulic base plate for tilt and offset, Tilt and offset: 15 degrees, Flow requirement: 3-4 GPM, 3 FT of hydraulic side travel adjustment, Adjustable support foot, Head Weight: 445 lbs.
Only used a few times, compared to new at $9,700.
View
Care Tree - Spade
Tree Spade, Skid steer mount, Adjustable Stands, Swing Door, Hydraulic Functions with Lever Controls upgraded unit with no cables!, 30 inch Root Ball
View
FFC - LAF1596
8-foot snow blade, Spring trip, Moldboard profile, Reversible cutting edge, Lateral float, Hydraulic 35° angle, Adjustable skid shoes, 8 inches of vertical travel, universal skid steer coupler
View
Hla - MB72BO500
HLA 72'" 4-in-1 Hydraulic Dump Loader bucket with 17.1 cu ft capacity. 33"D x 26"H. Includes 2 1/2"x 8" cylinders with Hoses.
View
Hla - SP350012
12 foot working width, Reversible rubber cutting edge, 38" high moldboard, 36" deep fixed end plates, Adjustable steel skid bars, Universal skid steer, Like New!!!!!
View
