Laneshark LS-4
The Lane Shark LS-4 stands as a light-duty rotary cutter designed for tasks such as clearing overgrown roadways, light land management, and property maintenance. It handles ease with materials like limbs, brush, saplings, and underbrush up to 2-3 inches in diameter. With its versatile capabilities, the Lane Shark offers 11 positions that enable vertical, offset, direct front (level), or 25°, 35°, and 45° cutting in both vertical and offset positions. It conveniently attaches to the front of any FEL tractor featuring an SSQA or JD Hook & Pin-Style attachment system, with adapters available separately to fit most other applications. Weighing just under 450 lbs, the Lane Shark LS-4 requires a tractor with a hydraulic flow rate of at least 8.5 GPM (optimal flow is 10 GPM) for optimal operation, featuring linear hydraulics. The unit is equipped with #10 ORB (O-ring Boss) inlets, necessitating a minimum inside diameter of 1/2". Please note that it's not compatible with diverter valves or skid steers, and some tractors may require a high-capacity motor. Additionally, the mower does not include hoses and couplers, which can be obtained separately from Lane Shark.
Purchase
Nationwide Shipping
Ask a Question
Series Models
LS-4
$4,700
$4,700
4' Cut Width | 2-3" Diameter, 11 Positions - Vertically/ Offset/ Front, 25°, 35°, & 45°, Skid Steer QA Mount, 450 lbs.
Item is In-Stock!Series Models
LS-4
$4,700
Item is In-Stock!
Purchase
$4,700
4' Cut Width | 2-3" Diameter, 11 Positions - Vertically/ Offset/ Front, 25°, 35°, & 45°, Skid Steer QA Mount, 450 lbs.
Item is In-Stock!Introducing the Lane Shark LS-4, a versatile light-duty rotary cutter tailored for various applications, including the clearance of overgrown roadways, light land management tasks, and property maintenance.
Key Features:
- Effortlessly handles branches, brush, saplings, and underbrush with diameters of up to 2-3 inches.
- Boasts 11 adjustable positions for cutting: vertical, offset, direct front (level), or at 25°, 35°, and 45° angles in both vertical and offset configurations.
- Compatible with front-end loader (FEL) tractors featuring either SSQA or JD Hook & Pin-Style attachment systems, with separate adapters available for other applications.
- Weighing just under 450 lbs, the Lane Shark LS-4 offers a balanced combination of power and mobility.
Operational Requirements:
- To unleash the full potential of the Lane Shark brush cutter, your tractor must provide a hydraulic flow rate of at least 8.5 GPM, with the optimal flow rate being 10 GPM. Note that hydraulics are linear, where 10 GPM equates to 100% of optimal flow, and 8.5 GPM corresponds to 85% of optimal flow, and so on.
- Ensure your tractor is equipped with rear remotes or a third function. Pressure must be sourced from the remote, and return flow should be directed to the sump (NOT through auxiliary hydraulics).
- The Lane Shark LS-4 comes with #10 ORB (O-ring Boss) inlets. When utilizing ORB, ensure a minimum inside diameter of 1/2".
- Please be aware that the Lane Shark is not compatible with diverter valves or skid steers.
Additional Consideration:
- Some tractors falling within the 15-20 GPM hydraulic flow rate range may require a high-capacity motor for optimal performance with the LS-4. If your tractor meets LS-4 specifications but falls within this flow rate range, consider opting for the high-capacity LS-4 model.
Important Note:
- The mower unit does not include hoses and couplers. Explore hose and coupler options available from Lane Shark to complete your setup.
Resources
Transformer Mower | Lane Shark Front Loader Brush Mowers
Tuesday, June 11, 2024
These mowers go onto the front loader of your tractor and are great for clearing brush or reaching over the side of a pond bank or trail.
