Filters (0)

Messick rental fleet, Only 46 Hours! There isn’t much that can stand up to this Crary® Bear Cat® 9 inch chipper! It’s powered by a 2.2L Kubota diesel engine. Based on a solid 4-inch “C” channel frame with torsion axle suspension, this chipper makes branches and trees up to 9 inches in diameter disappear. The CH922DH features a dynamically-balanced 30 x 1.25 inch thick rotor that weighs 275 pounds and produces tremendous chipping power. The CH922DH now features a Digital Display Controller (DDC) hydraulic feed system with a variable speed feed roller with instant reverse. The DDC features: • Movable Digital TFT screen for easy viewing, even in bright sunlight conditions • Soft key menu selection buttons for simple user navigation • Pre-programmed maintenance schedule reminders • Hydraulic system diagnostic capabilities • Troubleshooting screens to provide in-field help • Pre-programmed with English, Spanish, French, Portuguese, Norwegian, Russian and Chinese • Tested in the most extreme conditions to ensure longevity The Chippers’ hydraulic feed system is electronically controlled. If the rotor speed drops below optimal operational RPM range, the controller pauses the feed roller to allow the rotor to regain speed, and then restarts feeding once optimal rotor RPM is achieved. This AutoFeed function allows for less fatigue on wear parts and maximizes efficiency. Additional features include a 15-inch diameter feed roller containing 10 knife blades, four reversible chipping blades made from heat-treated tool steel, adjustable 4-sided anvil and an 8-inch diameter discharge chute. A triple-banded belt drive generates positive power, and a hydrostatic feed control provides the operator with infinite feed settings for all types and sizes of debris. A telescoping tongue along with torsion axle suspension makes towing easy. 2? coupler standard. With 18 gallons in the fuel tank, you’ll create piles of chips between refills. Engine Make: Kubota Diesel Gross HP: 35 Displacement: 2.2 Liter Starter Type: Electric Dimensions Max Chipping Capacity: 9" Chute Opening: 31" x 31" Chute Throat: 9" x 9" Rotor Size/Weight: 30" x 1.25"/275 lbs. L x W x H: 127" x 79" x 100" Chipper Chipping Blades: 4 Reversible Heat-treated Drive Type: Triple-Banded Belt Feed System: Hydraulic Auto Feed: Yes Hydraulic Controller: DDC System Weight: 2,725 lbs. Trailer: 2" Ball Wheels/Tires: ST205/75R15

Self-Propelled walk behind blower, 18hp Vanguard engine, 320 km/h air velocity, can clear 2,000 meters squared of leaves in under 30 minutes. Like new condition!

3100 PSI Pressure washer, 2.8GPM flow, Gasoline Briggs and Stratton 205CC engine, Detergent tank, 4 Different degree spray tips, Brand new pump.

Very nice 54" Trim Star walk behind mower, only 74 hours, 23 Hp Kawasaki, Gas, Air Cooled Engine, Electric Start, Hydrostatic Transmission, Self-Propelled, 2WD, 2 Axles, Fixed Axle, Hydraulic Brakes, Skid Steering, 11 X 4.00 - 5 /3.25 Front Tires, 20 X 10 -10 Rear Tires, Steel Wheels, Replaceable Edge, Poly Primary Tank, 54” Cut width

22 ton New Holland wood splitter. 3 point hook up.

60" seeder, spiked front roller, 3 point hitch, surface rust, seed-box is in great shape. Ready to plant seed

10" chipping capacity chipper, dual hydraulic feed roller, 30" x 42" chipper hopper opening, 360 degree chute rotation, 3 point hitch, 540 PTO drive, 36" rotor diameter with 4 reverable chipping knives, 4-8 gpm hydraulic flow required, 80-120 horsepower required, adjustable discharge chute, shearbolt protected, fold up hopper, Hydraulic feed hoppers with a wrap-around lever that starts and stops the dual spring loaded rollers to maximize chipping. Almost new!!! compare to new list $15,100.00! 10" chipping capacity chipper, dual hydraulic feed roller, 30" x 42" chipper hopper opening, 360 degree chute rotation, 3 point hitch, 540 PTO drive, 36" rotor diameter with 4 reversable chipping knives, 4-8 gpm hydraulic flow required, 80-120 horsepower required, adjustable discharge chute, shear bolt protected, fold up hopper, Hydraulic feed hoppers with a wrap-around lever that starts and stops the dual spring loaded rollers to maximize chipping. Almost new!!! compare to new list $15,100.00!

5'' chipper / 540 pto drive / cat 1 3 point hitch / manual feed / adjustable top discharge chute

6 Foot Turf Renovator/Over seeder, category I three-point hitch mount, rated for up to 65 hp tractors, 71" working width, 82" overall width, 8" diameter front & rear spiked rollers with more-aggressive/less-aggressive angle adjustment, equipped with optional grass seed box with metered seed flow adjustment lever, approx. 1050lb weight, Serial #888497